Keeping your snowboard in tune is a must , any rider should know. If everything on your snowboard is working correctly then gaining fast speeds and laying down precise curves on the turns should be simple. A properly turned snowboard is more predictable than one that's on the'outs'. Yes, you can pay someone to do this for you ; although you simply don't want to hire anyone. Don't open your phonebook and choose someone without knowing the type of work that they do. Snowboards are expensive and if they screw up, it'll mess up your valued possession. Ask other snowboarders who does the work for them ; typically they are going to be in a position to endorse someone who is perfect for the job. Paying to have your snowboard tuned to perfection will cost you around $20-$40 ; although it is possible that you can do it on your own, if you know how.
To properly tune your snowboard there are several things that you will need to do. To begin with you will need to set up 2 sawhorses in an area which has plenty of ventilation and room to work. Then you'll want to remove the bindings ; although this is basically not necessary but it will be less complicated for you to work on the board if they're out of your way. Next, you'll wish to take some window cleaner and paper towels to wipe down and clean your snowboard to the best of your ability with using only that product.
Now comes the genuine stuff. You will need to use some base cleaner and some rags to give your snowboard an even more thorough cleaning than before . This step here is why you would like a very well ventilated area as the fumes from the base cleaner are very powerful and not to mention, they are highly flammable. So do not do this around any type of open flame.
Keep on using the base cleaner till you can establish that it is not removing any kind of wax or ground in mud. Then, with the base up, employ a knife to dig out any sort of small rocks or stones which will have been embedded into the board. When doing this, ensure that you don't dig down into the core of the board, because that could be a whole different sort of repair[**].
Wipe the board down with acetone once done and then wait 15 minutes or so for the fumes to vanish before continuing on. Now, use a torch and your p-tex candle. Insert the candle into the blue flame on the torch and use the metal scraper to scratch away any melting soot from the candle. Take the melting p-tex and apply to the correct area of the board. When all holes are filled, let the board cool down for roughly 20 minutes before continuing on.
Now, use the metal scraper to dump away excess repair p-tex until the board is smooth once again. You may have to do that at several different angles to achieve the desired effect. Employ a scotchbrite pad to smooth out the base of the board in long, even strokes. Now, employ a filing tool to get rid of any burs along the metal edge. Ultimately, wax your board to seal in all the repairs and to make your board look like new. http://snowboardingzone.org/
About the Author:
Snowboarding Zone has a special offer of three free ebooks for signing up for our new Community Website. Come by today to take advantage of this free offer for three great Snowboarding Ebooks today. Find out information on Tune A Snowboard and much more in our Free Ebooks.
0 comments:
Post a Comment